Product Details

working principle:

When the valve supplies water from the inlet end, the water flows through the needle valve and enters the main valve control room. When the solenoid pilot valve opens, the water in the control room flows out through the solenoid pilot valve and the ball valve. The opening of the ball valve is greater than the opening of the needle valve, the pressure in the main valve control chamber is very low, and the main valve is in a fully open state. When the solenoid pilot valve is closed, the water in the main valve control chamber cannot flow out, and the pressure in the control chamber increases, pushing the diaphragm to close the main valve.

Product applications and features:

Function: remote control opening and closing of pipeline system, valve closing speed is adjustable.

Application areas: construction, water treatment, etc.

Features:

1. Opening and closing without friction;

2. Top-mounted structure;

3. Reliable sealing performance;

4. Easy to operate;

5.Wide range of application.

Technical Parameters:

Nominal diameter: DN50-DN600

Nominal pressure: PN16, N25

Applicable temperature: 0C ~80C

Applicable medium: clear water

Minimum pressure difference: 0.1MPa

Design standard: JB/T 10674- -2006

Test standard: GB/T 13927- -2008

Liquid level control height: ≤150mm

Main material

1 Gray cast iron, ductile iron, carbon steel, stainless steel - valve cover

2 Spring steel, stainless steel - spring

3 Gray cast iron, ductile iron, carbon steel, stainless steel - diaphragm pressure plate

4 Nitrile nylon reinforced rubber, EPDM nylon reinforced rubber - diaphragm

5 2Cr13 ——Valve stem

6 Gray cast iron, ductile iron, carbon steel, copper, stainless steel - valve disc

7 Nitrile rubber, EPDM rubber - O-ring

8 Gray cast iron, ductile iron, carbon steel, stainless steel - O-ring pressure plate

9 Copper alloy, stainless steel - valve seat

10 Gray cast iron, ductile iron, carbon steel, stainless steel - valve body